Item specifics
Description
PL-MIC02 Main features:
1. Using two stereo electret capacitor pickups, two separate signal amplification circuits, and acoustic interference tube technology, have good sensitivity and high directivity, pickup effect of long-distance and excellent directivity can easily be obtained;
2. Using multi-level signal amplification circuit and noise reduction circuit, the output impedance of 500 ohms, suitable for most cameras and camcorders;
3. Providing low-cut and sensitivity enhancements to meet the requirements of different occasions; low-cut can effectively reduce wind noise;
4. Using one AA battery, with excellent standby time, while providing a low voltage LED alerts;
5. Metal materials cavity, not only lightweight, rugged, but also conducive to high-frequency sound filtering of electromagnetic waves and enhancement of high frequency sounds;
6. Unique removable rubber buffers can effectively reduce the noise caused by vibration, providing ± 30 ° tilt adjustment; cold foot using a large lock nut with built-in 1/4 " copper nut;
7. High-density sponge, weaved signal cable and gold-plated audio output plug, can effectively reduce sound transmission noise.
PL-MIC02 Use scope by hot shoe directly:
Canon EOS 5D Mark III/5D Mark II/7D/6D, 70D/60D/700D/650D/600D/100D, EOS-M
Nikon D4/D4S, D3S/D800/D800E/D610/D600,
D7100/D7000/D5300/D5200/D5100/D3300/D3200
Sony a7s/a7r/a7, a99/a77II/a65/a58/a57/a37, a5000/a3000, RX1
Use scope by 2.5mm adapter plug (sold separately):
Fuji X-T1/X-PRO1/X-PRO2/X-E2/X-E1, X-100S/X-100/X-20/X-10/X-M1/X-A1
PL-MIC02 Specifications:
Pickup type: Stereo electret capacitance x 2
Frequency response: 50Hz-16KHz
Sensitivity:-45dB
Enhance: +10 dB
Low-cut frequency: 60Hz 10dB (otc)
Output impedance: 500Ω (AT 1KHz)
SNR: 76dB
Maximum load SPL: 120dB
Battery type: AA battery
Cable length: 33cm
Plug: Gold-plated 3.5mm in diameter
Dimensions (excluding sponge): 200 x 42 x 65mm
Weight: about 120g
IS-A Features:
1. The main body made of metal materials, affixed with non-slip rubber pad;
2. Designed with 1/4" screw hole, and comes with 2 pieces of 1/4" adapter screws;
3. Can support 2 cameras or flash units (need hot shoe mount adapter) at the same time.
IS-A Specifications:
Dimensions: 27.5 × 3.2 × 0.5cm
Main material: aluminum alloy
Product weight: 150g
Maximum loading capacity: 3kg
Package Including:
1 x iShoot DC/DV Professional Stereo Microphone PL-MIC02
1 x Camera Bracket IS-A
(The other items in the photos not listed here are for illustrating only, not included)