Tips to Installing the Rear Lens Cap on Canon Cameras
Tips to Installing the Rear Lens Cap on Canon Cameras
BlackRapid Canon Camera Bling Rear Lens Cap For Canon Cameras Easy to spot Lens caps for Canon cameras are an excellent way to quickly identify your lens when in your bag.rear lens cap for canon Quickly and clearly distinguish between different lenses you have. The caps are raised, bold and bright labeling which enables easy vision. These are also ideal for quickly identifying lenses when you change cameras or between photographers. Often times when changing lenses the old lens will be replaced with a new lens.
Capacities: For most cameras it is easy to replace the rear or full lens.rear lens cap for canon Many cameras have the ability to quickly replace the lens with the click of a button. This can be done without moving the camera. Simply turn off your camera, remove the CD from your drive, locate your disk icon, select "mount" and select the new lens/camera. The lens is then dropped into place on the front end of the camera. You can do the same for the front lens.
For many cameras it is quite difficult to remove the front lens from the camera without removing the rear lens first. However, this is not always necessary. newer cameras have a small hexagon-shaped tab at the very top of the lens. If you just pull down on this tab while your lens is still attached to the camera, it will snap out easily.
Installation: The installation of the black rubberized cap for the rear lens of your Canon camera is pretty simple. It basically involves taking off the front lens and gently removing the rear lens. Next you will need to place the two lens halves side by side and align them. Once they are aligned, hold the cap in place with pliers. Then carefully slide both pieces of the lens together until they are tightly pressed against the rear lens threads.
It's extremely important to make sure that the rear lens is properly installed before proceeding to the front lens. As soon as you see the front lens snaps into place, press and hold the rear lens firmly until it snaps into place again. Make sure that your grip is firm on the lens as you take the shot.
Once all of the camera has been set up, you can take several shots. Choose the ones that best express what you want the theme of the picture to convey. Once you are done, be sure to review the images and take some time to enjoy your work. After your first few pictures, you will probably wonder how you ever managed to get along without those sticky black strips on the lenses. Happy shooting!