Tips For Taking Care of Your Canon 70 200mm F/2.8 Lens

Tips For Taking Care of Your Canon 70 200mm F/2.8 Lens

A lens collar, sometimes called a cap collar, is a lens-clamp type accessory which enables the lens to be securely mounted on a tripod.lens collar Most modern tripod collars have permanently attached collars, although medium telephoto lenses of up to 200mm usually have detachable lens collars as well. There are basically two types of lens collar: exterior mounted and interior mounted. Exterior mounted collars are often made of brass, chrome or plastic. Interior mounted collars are usually made of nylon or other similar materials.

When attaching a lens to your camera, always look through the lens barrel through the hole in the side of the lens collar. The flat area on the bottom of the collar will allow you to grasp the lens tightly at its sides, while the rounded area on top will help you lift the lens up and away from your eye. Hold the lens firmly in one hand, with the other hand holding the tripod collar in front of you. The collar must be adjusted properly, with the fingertips of your right hand forming an X with the top and bottom pieces of the collar lined up with the side of the lens. Do not adjust the lens too tightly - it will distort your shots.

Some more accessory tips: If you have an expensive camera, it's worth investing in a tripod mount ring to prevent the lens from slipping out of the tripod when you're taking photos. Also, it is recommended that you purchase a rubber or latex foam tripod mount ring to ensure your safety. Many newer cameras come with tripod mount rings already attached, but if yours doesn't have this, it is fairly easy to buy one that does. Another way to prevent the lens from sliding out of the tripod is to make sure you use a tripod lock. This is a simple locking mechanism that prevents the camera from tilting down too far - just look for a tripod ring that has two or three teeth and place the lens collar onto the teeth.

It is important that you keep the lenses properly maintained at all times. If they are not correctly set up, they may become difficult to use, which can result in blurry images. The first step in proper lens maintenance is ensuring that the lens collar is properly adjusted. You should check the measurements on the box - they will normally be accurate. If you have a telephoto lens, you may need a larger tripod collar so that the entire length of the lens is covered.

Other possible problems include lens hoods and water bottles being caught up with the lens. If this happens, you can either unthread the ring from the tripod or take a photo to determine which way the lens needs to be unscrewed. Some users have reported that cleaning their collars can actually harm the lens. This is unlikely to happen if you follow the manufacturer's instructions on how to clean the tripod collar.

There are numerous other accessories available for use with the Canon 70-200mm f/2.8 lens that you may want to purchase. It is always good to shop around and see what kind of deals are available. Sometimes you can save quite a bit by purchasing the item from a different retailer. If you have any questions or concerns, however, it is always a good idea to return back the item to the place from which you purchased it in the first place so that you can ask any questions that you have about the particular model that you own.

Tags:affordable lens collar tripod mount ring | how to attach lens collar to tripod | lens collar foot for canon ef