How to Clean Your Acratech Long Lens Head

How to Clean Your Acratech Long Lens Head

Acratech Long Lens Head is the first step towards a good night's sleep. It's a small and handy tool that is a must have if you don't want to struggle to sleep all night. These are perfect for cleaning and focusing on the objects at your side tables or bed corners. You simply place it on the object of your choice and let it do the work for you. For those who love sleeping outdoors, it can be used as a lantern too.

This lens cleaning and focusing product come with two lenses. One of the lenses has a very large hole in it, and this is the one you need to poke into the surface of the table. The second lens has a very tiny hole which is just a few millimeters in diameter. You will have to use both of these in order to completely clean the lenses and get rid of any residual dirt or grime that may be present inside them.

You don't have to worry much about cleaning this gadget very often as long as you follow the instructions indicated on the box. The instructions tell you exactly how long you should wait between cleaning sessions and what type of tools you will need to conduct the cleaning process. It is also very important to note that you need to take care of this device properly so as not to damage it during the cleaning process. That is why it is important that you read the instruction manual very carefully before beginning your cleaning session. In addition, you also have to make sure that you don't use any cleaning agents, sprays or substances that might harm the Acratech Long Lens Head when you are cleaning it.

First, you should rinse the Acratech Long Lens Head in warm water using a sponge or paper towel. You can either do this in the sink of your bathroom or in the shower room. When it has completely dried up, you can put it back to its package and pop it back into the oven. Wait for it to heat up fully before putting it back to the oven. It is best that you leave it for a couple of minutes until everything has dried up and cleaned properly.

If you are going to use your Acratech Long Lens Head in the winter months, you need to use some extra care when cleaning it. This is because the lens material can easily get rusted during cold temperatures. To help you with keeping the lens clean longer, you can put it inside a freezer for a few minutes prior to cleaning it. This will definitely extend your lens' life span.

Most importantly, don't use any abrasive materials when cleaning this lens head. Don't use anything that could scratch it or even chip it off. These include such materials as sandpaper, scouring pad or pumice stone. Instead, you can try cleaning it gently by using warm water and a small brush. It is best that you do not rub it hard since you might ruin the material inside if you do. You should also make sure that you rinse off the lens head completely after cleaning it just to make sure that it doesn't form any residue that could damage your camera.

Tags:acratech panoramic tripod head | lens collar | acratech long lens head | ball head